Orbit Industries’ new F6M3B18CO provides rigid support for an electrical box and several MC cable runs – all in one assembly! This time-saving product is ideal for suspending boxes and / or conduits from drop wire or threaded rod.
The Box and Multi-Conduit to Wire / Rod Hanger is composed of a pre-galvanized steel bracket; with three snap-close spring steel clamps on either end. In the center of the bracket is a spring steel clip that supports the assembly from either #12-#8 drop wire; or 1/4” threaded rod. The outer conduit clamps take a cable range from 14-2 to 12-3 (MC or AC cable); or 3/8” Flex conduit.
Fasten a 4”, 4-11/16” or 5” square steel junction box to the bracket, via pre-punched holes near bracket center. Slide the central clip onto drop wire or rod. (Spring steel clip “snaps” into place without tools!) Then, run up to six cables to terminate on opposite sides of the box (additional box connectors required).
Contractors from the field report systems like the F6M3B18CO can save 65% or more in drop wire costs, as the entire box / conduit assembly is effectively supported by just a single wire or rod! In turn, this saves the installer considerable drilling, cutting and fastening costs for additional wire or rod.
F6M3B18CO also eliminates the need for offset conduit bending, as the completed box / conduit assembly can be accomplished with MC/AC/Flex cable – and does not need the additional support of tubular conduit such as EMT.
Orbit’s Box and Multi-Conduit to Wire / Rod Hanger comes in standard packages of 25 pieces. Rod / wire mounting clip and conduit support clamps come pre-assembled to the bracket.
To order a free sample of the F6M3B18CO, please call 844-909-0695, or log onto www.OrbitElectric.com.
